try to paint as good very una.bicicleta
Disclaimer: The content of this Post for
that looks more stupid is very useful.
that looks more stupid is very useful.
1 -* have to disassemble your bike
2 -* completely broken down and proceeds to remove all paint the picture either with paint remover or by scraping with a blade either a knife or a sharp cegueta.
3 -* and all the paint being revomida proceeds to give the whole picture sanded with sandpaper numero100 leaving fine sand box.
4 -* sanding and painting there to wash and dry well as well that there is no water in the box. (Like scissors or fork).
5 -* to paint the picture with some aerosol serciorate that is top quality I recommend you first apply a primer then apply the primary color of your selection and finally a layer of lacquer or gloss.
6 -* if compressor bas painting gets sold in stores when you buy the paint you apply alos both primary cars, color and gloss lacquer or recalls that when applying the paint to be sure to cover your nose and mouth.
even paint your picture empiesa by several layers allowing to dry between each approximately 5 minutes. like scissors or fork applied this procedure applies to primary and lacquer color or brightness.
7 -* painted and let it dry for half an hour in the sun or you have better or oven.
8 -* dry and decals to choose your table and then proceeds to reassemble the picture for a better performance not forget to grease telescope, center, front and rear wheel if necessary change all the bearings.
9 -* and finally covers whips and also change both brake and speed and make adjustments
* Score
2 -* completely broken down and proceeds to remove all paint the picture either with paint remover or by scraping with a blade either a knife or a sharp cegueta.
3 -* and all the paint being revomida proceeds to give the whole picture sanded with sandpaper numero100 leaving fine sand box.
4 -* sanding and painting there to wash and dry well as well that there is no water in the box. (Like scissors or fork).
5 -* to paint the picture with some aerosol serciorate that is top quality I recommend you first apply a primer then apply the primary color of your selection and finally a layer of lacquer or gloss.
6 -* if compressor bas painting gets sold in stores when you buy the paint you apply alos both primary cars, color and gloss lacquer or recalls that when applying the paint to be sure to cover your nose and mouth.
even paint your picture empiesa by several layers allowing to dry between each approximately 5 minutes. like scissors or fork applied this procedure applies to primary and lacquer color or brightness.
7 -* painted and let it dry for half an hour in the sun or you have better or oven.
8 -* dry and decals to choose your table and then proceeds to reassemble the picture for a better performance not forget to grease telescope, center, front and rear wheel if necessary change all the bearings.
9 -* and finally covers whips and also change both brake and speed and make adjustments
* Score
* PS: Comment does not cost anything ...
Author: Vicexx
To:!
To:!
No hay comentarios:
Publicar un comentario